Product for mounting and dismounting and for maintenance

HN 11/SNL

Diámetro interior:

Valor campo personalizado

Diámetro exterior:

Valor campo personalizado

Ancho:

Valor campo personalizado

-€

Referencia: HN 11/SNL Categorías: Herramientas mecánicas de montaje y desmontaje, Llaves para tuercas de fijación, Productos de mantenimiento

The unique protected design of this SKF Hook spanner, allows it to tighten and loosen lock nuts whilst these are inside SKF split plummer (pillow) block housings (SNL). Alternatively it can be used as regular hook spanner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. The SKF hook spanner HN 11/SNL, is designed for nuts with an outer diameter of 75 mm. In particular for lock nuts of series KM 11, KMK 11, KMFE 11, KMT 10, N 11 and M48x1,5, M50x1,5 (DIN 1804).

PRODUCTOS RELACIONADOS

ref.

729865 A

Product for mounting and dismounting and for maintenance

SKF Feeler Gauges 729865 A are designed to measure clearances. A typical application is to measure the internal clearance of spherical roller bearings during the mounting process. The 729865 A consists of 13 blades of 100 mm (4 in.) in a plastic cover.

ref.

HN 14

Product for mounting and dismounting and for maintenance

The SKF Hook spanner, size 14, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 92 mm. To be more specific for locknuts: KM 14, KMK 14, KMFE 14 and N 14.

ref.

HN 17

Product for mounting and dismounting and for maintenance

The SKF Hook spanner, size 17, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 110 – 115 mm. To be more specific for locknuts: KM 17, KMK 17, KMFE 17, KMT 16, AN 17 and M72x1,5, M75x1,5, M80x2 (DIN 1804).

ref.

HN 16

Product for mounting and dismounting and for maintenance

The SKF Hook spanner, size 16, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 105 mm. To be more specific for locknuts: KM 16, KMK 16, KMFE 16, KMT 15 and AN 16.

ref.

HN 15

Product for mounting and dismounting and for maintenance

The SKF Hook spanner, size 15, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 95 – 100 mm. To be more specific for locknuts: KM 15, KMK 15, KMFE 15, KMT 13, KMT 14, AN 15 and M62x1,5, M65x1,5, M68x1,5, M70x1,5 (DIN 1804).

ref.

TMMP 2X170

Product for mounting and dismounting and for maintenance

One of the most common ways to dismount small to medium size bearings is to use a mechanical puller. The SKF TMMP 2X170 is a two arm puller for small to medium bearings. The SKF Standard Jaw Pullers TMMP series allow for easy and fast dismounting jobs and safe puller operation.

ref.

TMMP 2X65

Product for mounting and dismounting and for maintenance

One of the most common ways to dismount small to medium size bearings is to use a mechanical puller. The SKF TMMP 2X65 is a small two arm puller for small bearings and short dismounting distances. Provided with a handle bar to generate the pulling force. The SKF Standard Jaw Pullers TMMP series allow for easy and fast dismounting jobs and safe puller operation.

ref.

LHMF 300/5

Lubrication (fluid)

Our mounting and dismounting fluids are recommended when using SKF hydraulic equipment such as hydraulic pumps, HMV nuts, oil injection equipment, among others. The one recommended fro dismtounting with the oil injection technique has a higher viscosity. The one with the lower viscosity is for more for mounting and general purpose applications. Be aware that environment temperatures might alter the choice of these oils.

ref.

729126

Product for mounting and dismounting and for maintenance

La manguera de presión flexible está diseñada para conectar fácilmente bombas y conjuntos de inyectores a la aplicación con su junta de presión.

ref.

729124

Product for mounting and dismounting and for maintenance

El SKF 729124 está destinado principalmente a las tuercas hidráulicas SKF (más pequeñas que HMV 55E) para montar rodamientos o componentes donde se requiere una presión máxima de 100 Mpa (14 500 psi). El 729124 también puede utilizarse para aplicaciones de inyección de aceite para extraer rodamientos de elementos rodantes.

soluciones Técnicas

para el Mantenimiento Industrial

Brindamos una gama completa de soluciones técnicas, incluyendo diagnóstico avanzado, reparación, actualización de sistemas y asesoría técnica. Nuestro equipo de expertos está comprometido con ofrecerte soluciones personalizadas que se adapten a las necesidades específicas de tu operación, asegurando la máxima productividad y seguridad de tus instalaciones.

PRODUCTOS RELACIONADOS

soluciones Técnicas

para el Mantenimiento Industrial

Pide más información

rellenando nuestro formulario

O CONTACTA DIRECTAMENTE