Lubrication (fluid)

LHMF 300/1

Diámetro interior:

Valor campo personalizado

Diámetro exterior:

Valor campo personalizado

Ancho:

Valor campo personalizado

-€

Referencia: LHMF 300/1 Categorías: Fluidos hidráulicos, Herramientas hidráulicas de montaje y desmontaje, Productos de mantenimiento

Our mounting and dismounting fluids are recommended when using SKF hydraulic equipment such as hydraulic pumps, HMV nuts, oil injection equipment, among others. The one recommended fro dismtounting with the oil injection technique has a higher viscosity. The one with the lower viscosity is for more for mounting and general purpose applications. Be aware that environment temperatures might alter the choice of these oils.

PRODUCTOS RELACIONADOS

ref.

TMMP 10

Product for mounting and dismounting and for maintenance

El extractor de garras de alto rendimiento SKF TMMP 10 es un extractor mecánico de tres brazos que está diseñado para desmontar rodamientos. El extractor se caracteriza por su exclusivo sistema de brazo pantógrafo, que proporciona un agarre excepcional y ayuda a contrarrestar la desalineación durante las operaciones de desmontaje. El extractor está diseñado para realizar trabajos de desmontaje fáciles, rápidos y seguros de rodamientos, y componentes similares con ajuste de interferencia en el eje.

ref.

HN 14

Product for mounting and dismounting and for maintenance

The SKF Hook spanner, size 14, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 92 mm. To be more specific for locknuts: KM 14, KMK 14, KMFE 14 and N 14.

ref.

1077589

Product for mounting and dismounting and for maintenance

SKF Pressure Gauges are designed to fit SKF Hydraulic Pumps and SKF Oil Injectors. The gauges are all liquid filled and equipped with a restriction screw in order to absorb any sudden pressure drop thereby preventing damage. Safety glass and blowout discs are standard for all gauges and all have dual scales (MPa/psi).For pressures up to 3000 bar (300 MPa/43,500 psi)

ref.

HN 17

Product for mounting and dismounting and for maintenance

The SKF Hook spanner, size 17, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 110 – 115 mm. To be more specific for locknuts: KM 17, KMK 17, KMFE 17, KMT 16, AN 17 and M72x1,5, M75x1,5, M80x2 (DIN 1804).

ref.

1077587/2

Product for mounting and dismounting and for maintenance

ref.

TMMP 2X65

Product for mounting and dismounting and for maintenance

One of the most common ways to dismount small to medium size bearings is to use a mechanical puller. The SKF TMMP 2X65 is a small two arm puller for small bearings and short dismounting distances. Provided with a handle bar to generate the pulling force. The SKF Standard Jaw Pullers TMMP series allow for easy and fast dismounting jobs and safe puller operation.

ref.

TMMP 3X230

Product for mounting and dismounting and for maintenance

One of the most common ways to dismount small to medium size bearings is to use a mechanical puller. The SKF TMMP 3X230 is a three arm puller for small to medium sized bearings. It helps the user to safeguard against damage to the bearing or to the bearing seating during dismounting. The SKF Standard Jaw Pullers TMMP series allow for easy and fast dismounting jobs and safe puller operation.

ref.

LHDF 900/5