Product for mounting and dismounting and for maintenance

TMJL 50

Diámetro interior:

Valor campo personalizado

Diámetro exterior:

Valor campo personalizado

Ancho:

Valor campo personalizado

-€

Referencia: TMJL 50 Categorías: Bombas hidráulicas e inyectores de aceite, Herramientas hidráulicas de montaje y desmontaje, Productos de mantenimiento

The SKF TMJL 50 is mainly intended for larger SKF Hydraulic Nuts and SKF OK Coupling hydraulic chambers, but is also suitable for applications where a maximum pressure of 500 bar (50 MP a / 7250 psi) is required. Supplied in a sturdy carrying case.

PRODUCTOS RELACIONADOS

ref.

729865 A

Product for mounting and dismounting and for maintenance

SKF Feeler Gauges 729865 A are designed to measure clearances. A typical application is to measure the internal clearance of spherical roller bearings during the mounting process. The 729865 A consists of 13 blades of 100 mm (4 in.) in a plastic cover.

ref.

1077589

Product for mounting and dismounting and for maintenance

SKF Pressure Gauges are designed to fit SKF Hydraulic Pumps and SKF Oil Injectors. The gauges are all liquid filled and equipped with a restriction screw in order to absorb any sudden pressure drop thereby preventing damage. Safety glass and blowout discs are standard for all gauges and all have dual scales (MPa/psi).For pressures up to 3000 bar (300 MPa/43,500 psi)

ref.

HN 7

Product for mounting and dismounting and for maintenance

The SKF Hook spanner, size 7, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 52 – 55 mm. To be more specific for locknuts: KM 7, KMK 7, KMFE 7, KMT 6, KMT 7, N 07 and M28x1,5, M30x1,5, M32x1,5, M35x1,5 (DIN 1804).

ref.

HN 4

Product for mounting and dismounting and for maintenance

La llave de gancho SKF, tamaño 4, está diseñada para facilitar el apriete y afloje de las tuercas de fijación. Se utiliza para asegurar y ajustar rodamientos en ejes cónicos, manguitos de fijación y manguitos de desmontaje. Se adaptan a una variedad de tuercas de fijación con diámetro(s) exterior(es) de 30 a 32 mm. Para ser más específicos, para las tuercas de fijación: KM 4, KMK 4, KMFE 4, KMT 1, KMT 2, N 04 y M14x1,5, M16x1,5 (DIN 1804).

ref.

HN 17

Product for mounting and dismounting and for maintenance

The SKF Hook spanner, size 17, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 110 – 115 mm. To be more specific for locknuts: KM 17, KMK 17, KMFE 17, KMT 16, AN 17 and M72x1,5, M75x1,5, M80x2 (DIN 1804).

ref.

HN 16

Product for mounting and dismounting and for maintenance

The SKF Hook spanner, size 16, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 105 mm. To be more specific for locknuts: KM 16, KMK 16, KMFE 16, KMT 15 and AN 16.

ref.

HN 1

Product for mounting and dismounting and for maintenance

La llave de gancho SKF, tamaño 1, está diseñada para facilitar el apriete y afloje de las tuercas de fijación. Se utiliza para asegurar y ajustar rodamientos en ejes cónicos, manguitos de fijación y manguitos de desmontaje. Se adaptan a una variedad de tuercas de fijación con diámetros exteriores de 20 a 22 mm. Para ser más específicos, para las tuercas de fijación: KM 1, KMK 1, N 01 y (DIN 1804).

ref.

TMMP 3X230

Product for mounting and dismounting and for maintenance

One of the most common ways to dismount small to medium size bearings is to use a mechanical puller. The SKF TMMP 3X230 is a three arm puller for small to medium sized bearings. It helps the user to safeguard against damage to the bearing or to the bearing seating during dismounting. The SKF Standard Jaw Pullers TMMP series allow for easy and fast dismounting jobs and safe puller operation.

ref.

LHDF 900/5

Lubrication (fluid)

Our mounting and dismounting fluids are recommended when using SKF hydraulic equipment such as hydraulic pumps, HMV nuts, oil injection equipment, among others. The one recommended fro dismtounting with the oil injection technique has a higher viscosity. The one with the lower viscosity is for more for mounting and general purpose applications. Be aware that environment temperatures might alter the choice of these oils.

ref.

729126

Product for mounting and dismounting and for maintenance

La manguera de presión flexible está diseñada para conectar fácilmente bombas y conjuntos de inyectores a la aplicación con su junta de presión.

soluciones Técnicas

para el Mantenimiento Industrial

Brindamos una gama completa de soluciones técnicas, incluyendo diagnóstico avanzado, reparación, actualización de sistemas y asesoría técnica. Nuestro equipo de expertos está comprometido con ofrecerte soluciones personalizadas que se adapten a las necesidades específicas de tu operación, asegurando la máxima productividad y seguridad de tus instalaciones.

PRODUCTOS RELACIONADOS

soluciones Técnicas

para el Mantenimiento Industrial

Pide más información

rellenando nuestro formulario

O CONTACTA DIRECTAMENTE