Rolling bearing service (monitoring)

SMSW 36LPAST

Diámetro interior:

Valor campo personalizado

Diámetro exterior:

Valor campo personalizado

Ancho:

Valor campo personalizado

-€

Referencia: SMSW 36LPAST Categorías: Alineadores, Arandelas esféricas, Productos de mantenimiento

Spherical washers are designed to create an exact, parallel plane between the bolt head and the face of the nut. These washers automatically adjust and compensate for the angular deviation between the planes and prevent the bolt from bending.

PRODUCTOS RELACIONADOS

ref.

729865 A

Product for mounting and dismounting and for maintenance

SKF Feeler Gauges 729865 A are designed to measure clearances. A typical application is to measure the internal clearance of spherical roller bearings during the mounting process. The 729865 A consists of 13 blades of 100 mm (4 in.) in a plastic cover.

ref.

HN 4

Product for mounting and dismounting and for maintenance

La llave de gancho SKF, tamaño 4, está diseñada para facilitar el apriete y afloje de las tuercas de fijación. Se utiliza para asegurar y ajustar rodamientos en ejes cónicos, manguitos de fijación y manguitos de desmontaje. Se adaptan a una variedad de tuercas de fijación con diámetro(s) exterior(es) de 30 a 32 mm. Para ser más específicos, para las tuercas de fijación: KM 4, KMK 4, KMFE 4, KMT 1, KMT 2, N 04 y M14x1,5, M16x1,5 (DIN 1804).

ref.

HN 17

Product for mounting and dismounting and for maintenance

The SKF Hook spanner, size 17, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 110 – 115 mm. To be more specific for locknuts: KM 17, KMK 17, KMFE 17, KMT 16, AN 17 and M72x1,5, M75x1,5, M80x2 (DIN 1804).

ref.

HN 16

Product for mounting and dismounting and for maintenance

The SKF Hook spanner, size 16, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 105 mm. To be more specific for locknuts: KM 16, KMK 16, KMFE 16, KMT 15 and AN 16.

ref.

HN 15

Product for mounting and dismounting and for maintenance

The SKF Hook spanner, size 15, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 95 – 100 mm. To be more specific for locknuts: KM 15, KMK 15, KMFE 15, KMT 13, KMT 14, AN 15 and M62x1,5, M65x1,5, M68x1,5, M70x1,5 (DIN 1804).

ref.

TMMP 3X185

Product for mounting and dismounting and for maintenance

One of the most common ways to dismount small to medium size bearings is to use a mechanical puller. The SKF TMMP 3X185 is a three arm puller for small to medium sized bearings. It helps the user to safeguard against damage to the bearing or to the bearing seating during dismounting. The SKF Standard Jaw Pullers TMMP series allow for easy and fast dismounting jobs and safe puller operation.

ref.

TMMP 2X65

Product for mounting and dismounting and for maintenance

One of the most common ways to dismount small to medium size bearings is to use a mechanical puller. The SKF TMMP 2X65 is a small two arm puller for small bearings and short dismounting distances. Provided with a handle bar to generate the pulling force. The SKF Standard Jaw Pullers TMMP series allow for easy and fast dismounting jobs and safe puller operation.

ref.

TMMP 3X230

Product for mounting and dismounting and for maintenance

One of the most common ways to dismount small to medium size bearings is to use a mechanical puller. The SKF TMMP 3X230 is a three arm puller for small to medium sized bearings. It helps the user to safeguard against damage to the bearing or to the bearing seating during dismounting. The SKF Standard Jaw Pullers TMMP series allow for easy and fast dismounting jobs and safe puller operation.

ref.

729834

Product for mounting and dismounting and for maintenance

La manguera de presión flexible está diseñada para conectar fácilmente bombas y conjuntos de inyectores a la aplicación con su junta de presión.

ref.

729124

Product for mounting and dismounting and for maintenance

El SKF 729124 está destinado principalmente a las tuercas hidráulicas SKF (más pequeñas que HMV 55E) para montar rodamientos o componentes donde se requiere una presión máxima de 100 Mpa (14 500 psi). El 729124 también puede utilizarse para aplicaciones de inyección de aceite para extraer rodamientos de elementos rodantes.

soluciones Técnicas

para el Mantenimiento Industrial

Brindamos una gama completa de soluciones técnicas, incluyendo diagnóstico avanzado, reparación, actualización de sistemas y asesoría técnica. Nuestro equipo de expertos está comprometido con ofrecerte soluciones personalizadas que se adapten a las necesidades específicas de tu operación, asegurando la máxima productividad y seguridad de tus instalaciones.

PRODUCTOS RELACIONADOS

soluciones Técnicas

para el Mantenimiento Industrial

Pide más información

rellenando nuestro formulario

O CONTACTA DIRECTAMENTE